SPECIFICATIONS

Application: Home Automation,Lights,Alarm Security etc.
Brand Name: Xingkechuang
Circuit board dimensions: 32mm*24mm
Description: XKC-003K4 Active Infrared Sensors,Infrared Diffusion Sensors
Features: Proximity Sensor
Lead wire length: 28 cm
Model Number: XKC-003K4
Mounting Type: According to your need
Operating Voltage: DC4.5-20V
Operating temperature: -20~85℃
Output: High&Low, NPN,Relay
Output type: High and low, NPN, Relay
Place of Origin: Guangdong, China
Quiescent Current: <200uA
Sensing angle: <110 degree cone angle
Sensing distance: Within 7 meters
Series: XKC-003K4 Active Infrared Sensors
Shell size: 52L*36W*23H mm(Black)
Theory: Infrared Diffusion
Type: Inductive Proximity Sensor
Usage: Proximity Sensor


Product Description

 



003K4-V
high and low output


003K4-NPN
NPN output


003K4-M
Relay output



 
1st. Overview 
XKC-003K4 is an automatic control product based on infrared technology. It has high sensitivity, strong reliability, and ultra-low voltage working mode. It is widely used in various automatic induction electrical equipment. 
2nd.Product Features 
1. Fully automatic sensing: when a person enters its sensing range, it outputs a high level, and when a person leaves the sensing range, it automatically delays and closes the high level and outputs a low level. 
2. Photosensitive control (optional, not set at the factory): photosensitive control can be set, no induction during the day or when the light is strong. 
3. Two trigger methods (selectable by jumper): 
a. Non-repeatable trigger mode: After the high level is sensed, the output will automatically change from high to low after the delay time is over. 
b. Repeatable trigger mode: that is, after the sensing output is high, if there is a human body moving in its sensing range during the delay period, its output will always remain high, and the delay will be high until the person leaves Change to low level (the sensor module will automatically extend a delay period after detecting each activity of the human body and use the time of the last activity as the starting point of the delay time); 
4.With induction blocking time (default setting: within 1s): after each induction output (high level becomes low level), the sensor module can set a blocking time period immediately, during which the sensor Does not accept any induction signal. This function can realize the interval between "induction output time" and "blocking time", and can be applied to interval detection products. At the same time, this function can effectively suppress various interferences generated during load switching. 
5.Wide working voltage range: the default working voltage is DC4.5V-20V. 
6. Micro power consumption: quiescent current <200 microampere. 
7. Output high and low level signal/NPN/relay output: it can be easily connected with various circuits. 
8. The induction delay output time is adjustable (about 5-300 seconds), and the induction distance is adjustable (within 7 meters). 
3rd. Product Applications 
1. Human body induction lamps. 
2. Human body induction toys. 
3. Security products. 
4. Industrial automation control, 
5. Automatic induction electrical equipment.